By accessing RF Micro Devices, Inc.’s (hereinafter “RFMD”) internet site you agree to the following terms. If you do not acknowledge to the following terms, please discontinue your use of this site.

The use of this site and the content therein, is permitted to private, non-commercial use. The use of press releases and other documents classified as public is permitted in public communications if the source for the information has been stated. Many of the products and methods sold and employed by RFMD are the subject of issued and pending patents.

This site and the contents herein are provided as a convenience to you. The contents of RFMD world wide web pages are provided on "as is" and "as available" basis. RFMD does not warrant that its web pages will be uninterrupted or error-free. RFMD reserves the right to revise the pages or withdraw access to them at any time. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE OR NON-INFRINGEMENT OR IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE AVAILABILITY, ACCURACY, RELIABILITY OR CONTENT OF THESE PAGES. RFMD SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS, OR FOR BUSINESS INTERRUPTION ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SERVICE, EVEN IF RFMD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSION OF CERTAIN WARRANTIES OR LIMITATIONS OF LIABILITY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THE LIABILITY OF RFMD WOULD, IN SUCH CASE, BE LIMITED TO THE GREATEST EXTENT PERMITTED BY LAW.

For your easy accessibility, RFMD may include links to sites on the Internet that are owned or operated by third parties. You acknowledge that RFMD has no control over the content of that site and cannot assume any responsibility for material created or published by such third-party sites. Such sites may not follow the same privacy, security, or accessibility standards as ours. In addition, a link to a non-RFMD site does not imply that RFMD endorses or guarantees the site or the products or services referenced in such third-party site, nor is RFMD responsible for the security, content or availability of third-party sites, their partners, or advertisers. Further, in no event shall RFMD be liable, directly or indirectly, to anyone for any loss or damage arising from or occasioned by the creation or use of the third-party sites or the information or material accessed through such sites. You should direct any concerns to the administrators or webmasters of these respective sites. RFMD reserves the exclusive right, at its sole discretion, to add, change, decline or remove, without notice, any feature or link to any of the third-party sites from the RFMD site and/or introduce different features or links to different users.

By submitting material to any of our servers, for example, by e-mail or via the RFMD® internet site, you agree that: (a) the material will not contain any item that is unlawful or otherwise unfit for publication; (b) you will use reasonable efforts to scan and remove any viruses or other contaminating or destructive features before submitting any material; (c) you own the material or have the unlimited right to provide it to us and RFMD may publish the material free of charge and/or incorporate it or any concepts described in it in our products without accountability or liability; and (d) you agree not to take action against us in relation to material that you submit and you agree to indemnify us if any third party takes action against us in relation to the material you submit.

Portions of this internet site require prearranged access and a site password. You are responsible for maintaining the confidentiality of your password and account, for restricting access to your password, and for any and all activities that occur under your account. You agree to notify RFMD immediately of any unauthorized use of your account or any other breach of security here. RFMD will not be liable for any loss that you may incur as a result of someone else using your password or account, either with or without your knowledge.

RFMD does not and cannot review the content posted by users on its site and is not responsible for such content. RFMD may, at any time, at its discretion remove any content posted by users.

You agree not to perform any Competitive Intelligence Activities or Benchmarking on RFMD Products, Services or the RFMD internet site. “Benchmarking” means the process of measuring the processes, products and services of other industry leaders in order to evaluate your own processes, products and services. “Competitive Intelligence” means information about a competitor’s business. “Competitive Intelligence Activities” means the process of monitoring competitors and the marketplace as a whole and collecting and analyzing information about competitors.

You agree to abide by all applicable U. S. export control laws and regulations for all RFMD products and services and you shall obtain any licenses or approvals required by the U. S. Government prior to export or re-export of RFMD’s products, software or technology. You agree not to export or re-export RFMD’s products, data, documentation, technology or software to any debarred country or any other countries on the United States of America embargoed list or to any persons listed in the U.S. Government Denied Persons List, unless otherwise authorized by the United States of America Government.

1. Prices
1. All prices are subject to adjustment on account of specifications, quantities, shipment arrangements or other terms and conditions that are not a part of the original price quotation.
2. Prices are exclusive of all federal, state, municipal or other government excise, sales, use, value added, occupational or like taxes, tariffs, customs, duties and importing fees. Prices are consequently subject to increase by the amount of any such tax, tariff, duty or fee that RFMD® pays or is required to pay or collect upon sale or delivery of products. Any certificate of exemptions or similar document or proceeding required to exempt the sale of products from sales or use tax liability shall be obtained by Buyer, at its expense.
2. Terms of Payment
   Terms are cash upon delivery, except where satisfactory open account credit is established, in which case terms are net thirty (30) days from the date of invoice. RFMD reserves the right at any time to revoke any credit extended to Buyer for any risk deemed sufficient by RFMD. RFMD will issue invoices on delivery in the case of all products; if deliveries are authorized in installments, each shipment shall be invoiced and payable when due without regard to other scheduled deliveries. Overdue payments shall be subject to finance charges computed at a periodic rate of 1.5% per month (18% per year) or, if less, the maximum rate permitted by law. All amounts owed by Buyer with respect to which there is no dispute shall be paid without set-off of any amount that Buyer may claim is owed by RFMD and regardless of any other controversies that may exist.
3. Delivery
1. All U.S. domestic deliveries are FOB Shipping Point. All international deliveries are FCA Seller's Factory (Incoterms 2000).
2. Title and risk of loss, with respect to the products shall pass to Buyer when delivery is made under Incoterms 2000 regardless of whether RFMD will install or supervise the installment of the products. Buyer hereby grants to RFMD a security interest in the products as security for the performance by Buyer of all its obligations hereunder.
3. Products held or stored by RFMD for Buyer shall be at the sole risk of Buyer, and Buyer shall be liable for the expense to RFMD of holding or storing products at Buyer's request.
4. RFMD shall make deliveries in installments and shall bill partial shipments as made.
5. All products will be scheduled for shipment in accordance with RFMD's applicable shipment sequence and RFMD will confirm in writing, and amend as appropriate, the shipment schedule. Under no circumstances shall RFMD be liable to Buyer for any delay either in shipment or in delivery.
4. Source Inspection
   Source inspection by Buyer or Buyer's customer must be stipulated in writing, at the time of ordering, and is subject to reasonable charges and safety and security conditions. Buyer shall have no right of access to RFMD's plant except as specifically authorized in advance by RFMD. Buyer or Buyer's agent shall indemnify and hold RFMD harmless from any and all suits, damages, and expenses of Buyer, its agents or customers resulting from personal injury including death or loss or damage of property occurring during, or in connection with, any visit to RFMD's plant.
5. Shipment
   Unless specific instructions to the contrary are supplied by Buyer, RFMD will select the carrier and ship the products to Buyer's address indicated on Buyer's purchase order. RFMD will not assume any liability in connection with the shipment or constitute any carrier as its agent. Buyer shall be responsible for making all claims with carriers, insurers, warehouses and others for non-delivery, loss, damage or delay. All claims for damage to products or shortage must be made within thirty (30) days of shipment.
6. Offer/Acceptance
   RFMD offers to sell and deliver the products and services specified herein in accordance with the terms and conditions hereof. THIS OFFER EXPRESSLY LIMITS ACCEPTANCE TO THE TERMS HEREOF AND ANY ADDITIONAL OR DIFFERENT TERMS PROPOSED BY BUYER ARE HEREBY REJECTED UNLESS EXPRESSLY ASSENTED TO IN WRITING BY RFMD.
7. Cancellation, Rescheduling, Returns and Modifications
   Any request for order cancellation, rescheduling, return, or modification must be made in writing and approved in writing by an authorized agent of RFMD at its principal office in North Carolina. No cancellations, quantity decreases, or push-outs may be made within 30 days of Factory Commit Date (FCD).
8. Cancellation Charges
1. For standard products, Buyer may cancel and/or reschedule subject to the following limitations and charges based upon the number of days from the date RFMD receives Buyer's written notice of cancellation to the FCD for the cancelled products:
1. Within 30 Days of FCD - No cancellations.
2. Between 30 and 90 days of FCD - No cancellations, however, Buyer may reschedule the line item to ship no later than 90 days from the original FCD.
3. More than 90 days from FCD - Cancellations accepted at no charge.
2. For non-standard products, built to Buyer's specifications or pursuant to RFMD's design, Buyer shall have no right to cancel or reschedule the delivery at any time. Orders for standard RF integrated circuit products ordered in non-standard tape and reel quantities are non-cancelable and non-returnable.
9. Returns
   Buyer shall not return any products for any reason without the prior authorization of RFMD and the issuance by RFMD of a Return Material Authorization (RMA). Returns must be shipped using RFMD's preferred carrier. The RMA shall specify the RMA number, the terms and conditions upon which returns may be made, and RFMD's preferred carrier. The RMA number must be marked on the outer shipping carton when products are returned. Returns made without obtaining prior authorization or without the RMA number properly marked on the outer shipping carton will be returned to sender at Buyer's expense. Products for which the seal of the anti-static shipping bag has been broken may not be returned.
10. Returns for Credit
    RFMD, at its option, may accept or reject any request by Buyer to return product for credit. If authorization is granted, Buyer shall pay RFMD a restocking fee equal to 35% of the current list price for standard products for each product returned, in addition to charges for unearned discounts, and any other reasonable charges. Buyer shall not return product without first obtaining an RMA number as stated above.
11. No Modification or Reverse Engineering
    Buyer agrees that it will not modify, adapt, alter, translate, or create derivative works from any of the products purchased under this Agreement or derive, attempt to derive or direct others to derive the source code of any software product or the physical structure or technical properties of any other product purchased under this Agreement by reverse engineering, disassembly, decompilation or any other means.
12. Warranty
    RFMD warrants that each product will be free of defects in material and workmanship for a period of one (1) year. This warranty commences on the date the product is shipped by RFMD. RFMD's sole liability and responsibility under this warranty is to repair, replace or issue a credit for the purchase price of any returned product which RFMD determines does not conform to the warranty. Product returned to RFMD for warranty service will be shipped to RFMD at Buyer's expense and will be returned to Buyer at RFMD's expense. In no event shall RFMD be responsible under this warranty for any defect which is caused by negligence, misuse or mistreatment of a product or for any unit which has been altered or modified in any way. The warranty for replacement products shall terminate with the warranty of the product.
13. Warranty Disclaimer
    RFMD'S EXPRESS WARRANTY TO BUYER CONSTITUTES RFMD'S SOLE LIABILITY AND BUYER'S SOLE REMEDY. RFMD DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
14. Defense of Infringement Claims
    If a third party files a claim or brings an action against Buyer alleging that a product, as delivered by RFMD to Buyer, infringes a United States Patent, United States copyright, United States trademark or other United States intellectual property right, and if RFMD is promptly advised of any such claim or action by Buyer, then RFMD shall assume and have sole control of the defense of any such action or claim at its own expense, including the sole power and authority to negotiate any settlement or compromise, and shall be responsible for any judgment or award issued in such action based on such infringement. If at any time use of the product is enjoined or is discontinued because of such action, RFMD shall at its sole option and expense, either procure for Buyer the right to continue using the product, replace or modify the product so that it becomes non-infringing or grant Buyer a credit for the purchase price of the product and accept its return. RFMD shall not have any liability or obligation under this paragraph if the infringement of a third party right is based in any way upon (i) the use of products in combination with other components, equipment or software not furnished by RFMD; (ii) use of a product in practicing any process; (iii) any product which has been modified or altered; (iv) the manner in which the product is used even if RFMD has been advised of such use; or (v) RFMD's compliance with Buyer's designs, specification or instructions. In no event shall RFMD's total liability to Buyer under this section exceed the aggregate sum paid to RFMD by Buyer for the infringing products.
15. Substitutions and Modifications of Specifications; General Product Change and Obsolescence/End of Life Notifications
    RFMD assumes the right to make substitutions and modifications in the specifications of any of the products or parts thereof designed by RFMD provided such substitutions or modifications will not materially affect the performance of such products. All general product change and obsolescence /end of life notifications for RFMD standard product offerings may be viewed at www.pcnalert.com ("PCN Alert"). It is Buyer's responsibility to check PCN Alert for these notifications and Buyer shall be deemed to have received notice of the notifications when they are posted on PCN Alert. Any questions regarding PCN Alert should be sent via email to PCNresponse@rfmd.com.
16. Assignment
    This Agreement is not assignable by Buyer and any attempt to assign any rights, duties or obligations arising hereunder shall be void.
17. Force Majeure
    RFMD shall not be liable for any loss or damage resulting from any delay in delivery or failure to give notice of delay when such delay is due to any cause or event beyond RFMD's control, including, without limitations, acts of nature, acts of terrorism, unavailability of supplies or sources of energy, riots, wars, fires, strikes, labor difficulties, delays in transportation, delays in delivery or defaults by RFMD's vendor or acts or omissions of Buyer. In the event of delay due to any such cause, time for delivery shall be extended for a period of time equal to the duration of such delay and Buyer shall not be entitled to refuse delivery or otherwise be relieved of any obligations as a result of the delay. If, as a result of any such cause, any scheduled delivery is delayed for period in excess of one-hundred-twenty (120) days, RFMD or Buyer shall have the right by written notice to the other to cancel the order for the products subject to the delayed delivery without further liability of any kind.
18. Limitation of Liability
    UNLESS OTHERWISE EXPRESSLY AGREED IN WRITING BY AN AUTHORIZED AGENT OF RFMD, RFMD SHALL NOT BE LIABLE TO BUYER, ITS CUSTOMERS OR ANY OTHER THIRD PARTY, IN CONTRACT, TORT, INDEMNITY OR OTHERWISE, FOR ANY LIABILITY, LOSS, DAMAGE, COST OR EXPENSE ARISING OUT OF ANY CLAIM FOR PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE RELATED TO THE PRODUCTS SOLD HEREUNDER. IN NO EVENT SHALL RFMD BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, LOST OPPORTUNITIES OR INTERRUPTION OF BUSINESS) OR PUNITIVE DAMAGES DUE TO ANY CAUSE WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT, STRICT LIABLITY, OR OTHERWISE, EVEN IF WARNED OF THE POSSIBILITY OF ANY SUCH LOSS OR DAMAGE AND EVEN IF ANY OF THE LIMITED REMEDIES IN THIS CONTRACT FAIL THEIR ESSENTIAL PURPOSE. NO SUIT OR ACTION SHALL BE BROUGHT AGAINST RFMD MORE THAN ONE YEAR AFTER THE RELATED CAUSE OF ACTION HAS ACCRUED. IN NO EVENT SHALL THE ACCRUED TOTAL LIABILITY OF RFMD FROM ANY LAWSUIT, CLAIM, WARRANTY OR OTHER DISPUTED MATTER EXCEED THE AGGREGATE SUM PAID TO RFMD BY BUYER UNDER THE ORDER THAT GIVES RISE TO SUCH LAWSUITS, CLAIM, WARRANTY OR DISPUTE.
19. Use in Safety and Life Support Applications
    THE PRODUCTS SOLD BY RFMD TO BUYER HEREUNDER ARE NOT DESIGNED OR INTENDED FOR USE IN APPLICATIONS WHERE FAILURE CAN REASONABLY BE EXPECTED TO RESULT IN PERSONAL INJURY OR DEATH (INCLUDING, WITHOUT LIMITATION, FOR NAVIGATION, WEAPONRY, AVIATION, NUCLEAR OR SAFETY EQUIPMENT, FOR SURGICAL IMPLANT, FOR RESCUE OF PERSONS OR TO SUPPORT, PROTECT OR SUSTAIN LIFE). BUYER USES, MARKETS AND SELLS THE PRODUCTS FOR SUCH APPLICATIONS AT ITS SOLE RISK AND EXPENSE, AGREES TO INDEMNIFY AND HOLD RFMD HARMLESS FROM ANY AND ALL DAMAGES, COSTS OR EXPENSES ARISING FROM ANY CLAIM OR ACTION OF ANY THIRD PARTY BASED ON THE ACTUAL OR ALLEGED FAILURE OF A PRODUCT TO PERFORM SUCH APPLICATIONS AND AGREES THAT RFMD'S WARRANTY IN THIS AGREEMENT DOES NOT EXTEND TO ANY SUCH APPLICATIONS.
20. Waivers
    All rights and remedies of RFMD hereunder shall be cumulative and may be exercised singularly or concurrently. In the event that either party shall on any occasion fail to perform any term herein and the other party shall not enforce that term, failure to enforce on that occasion shall not prevent enforcement on any other occasion.
21. Governing Law
    This Agreement is made in, governed by and shall be construed in accordance with the laws of the State of North Carolina without regard to conflicts of laws principles. If the products purchased hereunder are purchased by a Buyer residing in a country other than the United States, then the parties agree that the United Nations Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from this Agreement.
22. Exports
    The ultimate shipment of potential orders solicited by Buyer shall be subject to the right and ability of RFMD to make such sales and shipments under all policies, decrees, orders, laws, rules and regulations of the United States government and agencies and instrumentalities thereof presently in effect, or which may be in effect hereafter, which govern exports or otherwise pertain to export controls, including, without limitation, the Export Administration Regulations (EAR), International Traffic in Arms Regulations (ITAR) and Office of Foreign Assets Control (OFAC) regulations.
    
    Any order which has been accepted by RFMD but which cannot be fulfilled due to such policies, decrees, orders, laws, rules or regulations shall be considered to have been rejected when submitted to RFMD for acceptance or rejection. Buyer shall not transfer, directly or indirectly, any product or technical data received from RFMD or the direct product of such data, to any destination subject to export restrictions under U.S. law, unless prior written authorization is obtained from the appropriate U.S. government agency.
23. Entire Agreement and Amendments
    The terms and conditions herein, constitute the entire agreement between the parties and supersede all previous communications, whether oral or written. Any changes to this Agreement may be made only upon mutual agreement of the parties in writing.
24. Federal Contract Terms
    In any order entered into with the federal government, or in any order entered into with any other party that is a subcontract of a contract entered into with the federal government:
    1. only those clauses of the federal acquisition regulations that the regulations themselves mandate for a party in RFMD's position, given all relevant limitations including RFMD's status as a supplier or a subcontractor and the size and type of contract, apply; and
    2. RFMD retains proprietary rights in all technical data and computer software provided under such order. Only limited rights or restricted rights are provided to the federal government under the narrowest provision of those rights that the regulations allow, and no rights (including rights of audit of RFMD's cost or pricing data) are provided to any other party, including the prime contractor or any higher tier subcontractor.

It is our policy to hire, evaluate and promote employees on the basis of their ability, achievements, experience and performance. RFMD is an Equal Employment Opportunity, Affirmative Action employer, and also encourages veterans and those with disabilities to join us. RFMD ensures equal employment opportunity to all qualified employees and applicants for employment by prohibiting discrimination in employment due to race, color, age, sex, national origin, religion, disability, or any other status protected by applicable law. Furthermore, it is RFMD’s policy that all Human Resources practices including, but not limited to, recruitment, employment, compensation, benefits administration, training, promotions, transfers, and any other terms and conditions of employment, are administered according to the principles of equal employment opportunity.

Applicants for employment with a mental or physical impairment that might require an reasonable accommodation in order to participate in the application process should notify RFMD’s Human Resource Department at the number or emails provided above.

This privacy policy is applicable to this site and not necessarily to other RFMD sites on the world wide web. When leaving this site, please read the privacy policy applicable to the site you are visiting. If you do not agree with this privacy policy, please do not use this site.

RFMD is committed to the privacy of its website visitors. Please note that we may provide aggregate statistics about our customers, sales, traffic patterns, and related site information to reputable third parties, but these statistics will not intentionally include personally identifying information.

In order to respond to your questions or fulfill your requests, it may be necessary to ask for personal information such as your name, address, e-mail address and telephone number. We may use this information to respond to your requests, or to contact you via mail, e-mail or phone to inform you of new products, services or promotions we may offer. If you place an order for a product or request a service, we may need to contact you for additional information required to process or fulfill your order and/or request. However, we will not provide this information to a third party without your permission, except as necessary to process your order or fulfill your request.

RFMD has taken measures to prevent unauthorized access to, improper use of, or any inaccuracy of your personal information. For example, we use encryption technology when collecting or transferring sensitive data such as credit card information. RFMD will, on its own initiative, or at your request, replenish, rectify or erase any incomplete, inaccurate or outdated personal data.

No information may be submitted to RFMD by persons under the age of 18 without the consent of a parent or legal guardian, nor may persons under the age of 18 make purchases on this site without such consent.

RFMD as a policy does not respond to or comment on any rumors or other unattributed or anonymous statements, whether true or false, relating to the Company or its operations that are posted on the Internet or are transmitted by third parties, through e-mail, by any other form of electronic communication or otherwise.

Some of the information on this Web Site may contain projections or other forward-looking statements regarding future events or of RFMD’ future financial performance. Words such as "expects," "goals," "plans," "believes," "continues," "may," and variations of such words and similar expressions identify forward-looking statements. All such statements are based on our current expectations and are subject to a number of risks and uncertainties, and the actual events or results may differ materially. Please refer to the RFMD’ filings with the Securities and Exchange Commission, specifically, our most recent earnings release and our most recent Form 10-Q or Form 10-K for more information on the risk factors that could cause the actual results to differ materially from those contained in our forward-looking statements, including, among others, variable product demand; product introductions by the RFMD’ competitors; pricing pressures; and manufacturing issues, including product defects, errata, lower than anticipated manufacturing yields, and supply of components.

The contents of RFMD world wide web pages are Copyright © RFMD 2000. Any rights not expressly granted herein are reserved. Reproduction, transfer, distribution or storage of part or all of the contents in any form without the prior written permission of RFMD is prohibited except in accordance with the following terms. RFMD consents to you browsing RFMD world wide web pages on your computer, or printing copies of extracts from these pages for your personal use only and not for redistribution unless consented to in writing by RFMD. Individual documents in our world wide web pages may be subject to additional terms indicated in those documents. Except as expressly provided herein, RFMD does not grant any express or implied right to you under any patents, copyrights, trademarks, or trade secret information.

All software and other RFMD products are provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. Use of RFMD software or products by the Government constitutes acknowledgment of the proprietary rights that RFMD holds in them. RFMD is a registered trademark of RFMD, Inc. RFMD' product names are either trademarks or registered trademarks of RFMD. Other trademarks of RFMD include the transmission logo, RFMDTM, OPTIMUM TECHNOLOGY MATCHING® and PROPRIETARY, STATE-OF-THE-ART RF INTEGRATED CIRCUITS. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Your access to this site should not be construed as granting, by implication, estoppel or otherwise, any license or right to use any marks appearing on the site without the prior written consent of RFMD or the third-party owner thereof.

RFMD respects the intellectual property of others and requires that you do the same. In accordance with the Digital Millennium Copyright Act (“DMCA”), the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, RFMD will respond expeditiously to notices of alleged copyright infringement that are duly reported to its Designated Copyright Agent identified in the notice below. RFMD will disable and/or remove access to the website for users who are repeat infringers. If you believe that your content has been copied in a way that constitutes copyright infringement, or your intellectual property rights have been otherwise violated, please provide RFMD’s Copyright Agent the following information:

DMCA Notice of Alleged Infringement (“Notice”)

• Identify the copyrighted work that you claim has been infringed, or if multiple works are covered by this Notice you may provide a representative list of the copyrighted works that you claim have been infringed.
• Identify the material or link you claim is infringing and provide a description of where the infringing work is located on the website.
• Provide your mailing address, telephone number and, if available, email address.
• Include both of the following statements in the body of the Notice:
• “I hereby state that I have a good-faith belief that the disputed use of the copyrighted material is not authorized by the copyright owner, its agent, or the law (e.g., fair use).”
• “I hereby state that the information in this Notice is accurate and, under penalty of perjury, that I am the owner or authorized to act on behalf of the owner, of the copyright or of an exclusive right under the copyright that is allegedly infringed.”
• Provide your full legal name and your electronic or physical signature.
• Deliver this Notice, with all items completed, to RFMD:

  RFMD, Inc.
  7628 Thorndike Road
  Greensboro, NC 27409
  Attn: Treasury Dept.

While RFMD considers all such notices seriously, you may be liable for damages (including costs and attorneys’ fees) if you materially misrepresent that content or activity is infringing. Accordingly, if you are uncertain whether material infringes your copyrights (including whether use of copyrighted material may constitute fair use) you may wish to seek the advice of an attorney.