QPC6034

    5 - 6000 MHz Absorptive High Isolation SP3T Switch

    Last Time Buy >

    End of Life announced February 12, 2024 (PCN 24-0015).
    Last Time Buy: August 22, 2024
    Recommended replacement for new designs: QPC6044
    Contact your local sales representative for assistance.

    Note:  Any orders for Last Time Buy materials from Qorvo are considered non-cancellable, non-returnable.

    Key Features

    • 5 MHz to 6000 MHz Operation
    • Symmetrical SP3T
    • Non-Reflective (RFX ports)
    • Terminated All-Off State mode
    • No Blocking Caps Necessary unless voltage is on RF Line
    • High Isolation: 62 dB at 2 GHz
    • High Input IP3: +59 dBm
    • 2 kV ESD
    • +1.8 V Logic Compatible

    Qorvo's QPC6034 is a Silicon on Insulator (SOI) single-pole, 3-throw (SP3T) switch, designed for use in cellular, 3G, LTE, and other high performance communications systems. It offers high isolation symmetric topology with excellent linearity and power handling capability. No blocking capacitors are necessary on the RF ports. The design is non-reflective such that the RFX ports are terminated into 50 ohms in the off state. QPC6034 is +1.8 V logic compatible, and incorporates a single pin to disable the internal Negative Voltage Generator (NVG) and supply a negative voltage from off-chip, if necessary.

    Typical Applications

      • Base Station Equipment
      • Cellular / LTE Infrastructure
      • Datacards
      • Repeaters
      • Test and Measurement
    Switch Type SP3T
    Absorptive/Reflective Absorptive
    Frequency Min(MHz) 5
    Frequency Max(MHz) 6,000
    Insertion Loss(dB) 0.93
    Isolation(dB) 62
    Switching Speed(ns) 150
    IIP2(dBm) 110
    IIP3(dBm) 59
    IP0.1dB(dBm) 36
    Control Lines(#) 2
    Voltage(V) 5
    Current(mA) 0.09
    Package Type QFN
    Package(mm) 4.0 x 4.0
    RoHS Yes
    Lead Free Yes
    Halogen Free Yes
    ITAR Restricted No
    ECCN 5A991.G

    X-Microwave Design System

    This product is available as an X-Microwave Block (X-MWblock) for evaluation.

    X-MWblocks are RF and microwave "drop-in" components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy sweat soldering or silver epoxy processes are required. X-MWblocks are highly characterized with S-parameter models and connect with a patented solder-less interconnect technology.

    Order the X-Microwave Block for this product

    This product appears in the following application block diagrams:

    • Applications > Defense & Aerospace > Communications > Military Radio

      Military Radio